Cut SheetsProduct Catalogs
Systems Integrators
Systems Integrator Division

MonoSystems is your partner in cost containment. We work seamlessly with our System Integration Partners to provide unprecedented product innovation, support and service.

Because we sell, service and support DIRECT, we’re uniquely qualified to give you an edge when it comes to speed of service, cost containment and profitability.

We have miles of product installed in literally thousands of facilities across the globe, so we certainly understand your customers’ needs. We pride ourselves in the ability to offer more value to our clients, which in turn provides greater value to their customers. It’s the difference between being a supplier and a partner. And it’s been a part of our DNA for over 50 years.

Client Solutions
Walkable Raceway for Hunt Electric
Hunt Electric needed a safe, low-cost and low profile pathway for areas where standard ladder trays create clearance problems—such as around conveyors and body/paint shop turntables. In response, we developed....

Hunt Electric needed a safe, low-cost and low profile pathway for areas where standard ladder trays create clearance problems—such as around conveyors and body/paint shop turntables. In response, we developed the Walkable Raceway, which incorporates non-slip paint with a diamond plate tread that keeps employees and cabling safe and secure.

“Our installers told us they needed a cable pathway that maintained a lower profile than a standard ladder tray due to clearance issues… MonoSystems quickly developed a safe, durable, diamond-plated Walkable Raceway that was cost-effective and easy to install.”

— Eric Whiteman, Project Manager, Hunt Electric Corporation

  • Very low clearance – only 1¾” high
  • Use where standard ladder trays simply won’t fit
  • Comes standard in safety yellow
  • Non-slip, diamond plate treat
Pre-Cut Ladder Trays for JR Automation
When JR Automation needed custom-length trays, we developed the pre-cut ladder tray solution which features clearly marked labels to help identify pre-cut parts. Save on labor and material! “I recently....

When JR Automation needed custom-length trays, we developed the pre-cut ladder tray solution which features clearly marked labels to help identify pre-cut parts. Save on labor and material!

“I recently ordered cut-to-length cable tray and covers, and they were installed in a fraction of the budgeted time. My team couldn’t be happier. Kudos to MonoSystems for listening to our needs, and delivering a very valuable solution.”
— Mike Susky, JR Automation Technologies – Controls Tech Manager

  • Factory-cut to meet layout requirements
  • Factory-punched splice holes & plates included
  • Edges are clean & filed smooth
  • Take advantage of less downtime
KUKA North America: Innovation gets noticed every time
KUKA North America presented the 2016 Most Improved Supplier Award to MonoSystems in acknowledgement of the various new products and solutions we innovated on their behalf. It’s true: hard work....

KUKA North America presented the 2016 Most Improved Supplier Award to MonoSystems in acknowledgement of the various new products and solutions we innovated on their behalf. It’s true: hard work pays off!

We strive to achieve great partnerships with all of our customers, and we don’t hang our hat on winning awards. But it is nice to be recognized for hard work from an esteemed company like KUKA North America. We are humbled and proud.

“We at MonoSystems are truly grateful to win this award from KUKA. It confirms that our corporate philosophy of working with our customers as partners, and listening to their needs in the process of innovating, is recognized and appreciated.”

Innovations
Dip-Molded End Caps for General Motors
Developed as a custom solution for General Motors, our proprietary, dip-molded I-Beam End Caps will help prevent common injuries associated with the initial installation of field-cut and filed ladder trays....

Developed as a custom solution for General Motors, our proprietary, dip-molded I-Beam End Caps will help prevent common injuries associated with the initial installation of field-cut and filed ladder trays and cabling.

“Safety is always the number one concern in our facilities. Among these concerns are sharp edges associated with field cut cable tray. Upon our request, MonoSystems designed and manufactured end caps which now provide complete protection for the entire profile of their I-Beam.”

— Jerry Wideman, General Motors, Lead Engineer – Global Standards & Value Engineering

  • Installs in seconds
  • Prevents injuries
  • Reduces installation labor
  • Meets UL94 Flame Resistance requirement
  • Available in 4″ and 6″ sizes
Go-Anywhere Drop-Outs for General Motors
Introducing a new way to add a drop out wherever and whenever you want! You no longer need to remove dividers or power down your cabling to add your drop....

Introducing a new way to add a drop out wherever and whenever you want! You no longer need to remove dividers or power down your cabling to add your drop outs. Safely install your dividers on the ground prior to tray installation. Just two screws, and you’re done!

“Great Idea. Drop outs were an issue that the lead electricians brought to my attention recently. The fact that you were able to achieve your solution without our electricians having to drill in the field was impressive. Thanks for the innovation. Keep it coming!”

— Jerry Wideman, General Motors, Lead Engineer – Global Standards & Value Engineering

  • Safely installs from underneath the tray
  • Patent-pending design allows you to position the NRD where you want it and lock it in place using only 2 screws
  • Cable tie-down slots help you manage all your cabling!
  • 3/4″ x 3/16″ slots make it easy to control and manage your cables
  • Addresses important safety standards by reducing on-ladder installations
  • Labor savings means more profitable installations
  • Meets important safety standards / UL Listed
Multi-Purpose Floor-Mounted Pathway Solution for JR Automation
Need a multi-purpose pathway solution in areas where space is at a premium? The Elevated Floor Bracket saves labor, cost and space by maximizing the space UNDER your floor-mounted ladder....

Need a multi-purpose pathway solution in areas where space is at a premium? The Elevated Floor Bracket saves labor, cost and space by maximizing the space UNDER your floor-mounted ladder tray.

“Given the limited space we have in and around our cells, our integrators were looking for a pathway that combined power distribution along with gas and air lines. MonoSystems designed an elevated ladder tray that ran along the floor with room below for the additional lines. This eliminated tripping hazards around cells and saved us on the additional labor of building out separate pathways.”

— Mike Suskey, JR Automation, Controls Manager

  • Allows room for air, water and gas lines
  • Avoid tripping hazards
  • Easy installation
  • Ships with hold-down clamps pre-installed
  • Consolidates various types of pathways
  • Eliminates tripping hazards

Stay Connected with Niedax MonoSystems

Get the latest on new products, white papers, news and special offers!

Connect on Social Media

  • How can we help with your industrial projects?

  • This field is for validation purposes and should be left unchanged.
Don't see your industry or product solution? We can help.

Search Center

Search our complete catalog of solutions for product information, specs and instructions.
Lorem ipsum dolor sit amet, conipiscing elit.
Lorem ipsum dolor sit amet, conipiscing elit.
Download Now: